Packing List:

• 2 base bars (short/long)
• 2 pedals (L/R)
• Power charger 14V/1.5 A
• Open rachet (to secure the pedals after assembly)
• 4 allen screws
• Allen wrench

Assembly Instructions:

1. Flip the CyclePath upside down with function panel facing you
2. Install the short base bar at the top – use 2 screws and fasten in place
3. Install the large base bar at the bottom – use 2 remaining screws to fasten in place
4. Flip the CyclePath back into normal position with function panel facing you
5. Install left pedal (marked L) on the left by screwing it into place. Use the included open rachet to tightly fasten it
6. Install right pedal (marked R) on the right by screwing it into place. Use the included open rachet to tightly fasten it

Operating Instructions:

• Start pedaling to wake the CyclePath from sleep mode – the blue light should begin blinking
• If it doesn’t begin blinking, use the power adapter and make sure the unit is charged
• Go to www. cyclepath2life.com/games and find the games you would like to download
• Choose and download according to your device type (iPhone is iOS, Samsung is Android)
• Make sure the bluetooth on your device is turned ON
• Once the blue light is blinking rapidly on the CyclePath you can connect your smart phone/tablet/device
• Open any of the games and it will locate your CyclePath automatically and create a bluetooth connection
• Follow the instructions on how to play on the screen of your device